Return a Yamaha CLP 230 to factory Settings?

General discussion about digital pianos

Moderator: Feg

Post Reply
gpratley
Junior Poster
Junior Poster
Posts: 6
Joined: 27 Jun 2008, 13:57

Return a Yamaha CLP 230 to factory Settings?

Post by gpratley »

Hi,

Does anyone know if there is a quick way to restore a CLP 230 to the way it was when it left the factory? I have just brought a secondhand 230 and the prvious owner has changed all the settings.

I've been through and changed most one at the time but just wondered if there was a quick way. Most electronic equipment has a secret switch somewhere.

Thanks

Graham
User avatar
athomik
Persistent Poster
Persistent Poster
Posts: 261
Joined: 03 Jan 2007, 12:14
Location: England

Post by athomik »

Hold down the C2# , F2 & G2# keys while you power up. Use the Tempo/Function button to select test 47. Press the Metronome button to execute the test, which will take a few seconds. Press the Metronome button again to exit the test. Switch the CLP off and back on again.
gpratley
Junior Poster
Junior Poster
Posts: 6
Joined: 27 Jun 2008, 13:57

Post by gpratley »

Thanks.

When you say C2# , F2 & G2# this means the second C starting from the left ?

I've also found this :-
HOLD KEY "F0" AND POWER ON

Does this mean anything to anyone? What is the F0 key?

Graham
gpratley
Junior Poster
Junior Poster
Posts: 6
Joined: 27 Jun 2008, 13:57

Post by gpratley »

Ahhh hold that question. I just found this in the user guide

All Dual mode, Split mode, reverb, effect, touch sensitivity,
tuning settings, and the settings affected by the
Backup Functions can be restored to their original factory
preset values by holding the C7 key (right-most key
on the keyboard) while turning the [POWER] switch ON.


Thanks

Graham
markymark
Executive Poster
Executive Poster
Posts: 1434
Joined: 04 Apr 2005, 18:50
Location: UK

Post by markymark »

All the CLP2XX models as well as the CP300 and CP33 have this function too!
tonytom
New Member
New Member
Posts: 1
Joined: 24 Sep 2022, 01:30

Re: Return a Yamaha CLP 230 to factory Settings?

Post by tonytom »

Hi everyone. I have a yamaha clp 230 that is having a keyboard error, all other functions work fine, but the keyboard doesn't work, i have reset it but it doesn't work.
Post Reply