UK Piano Page Piano Forum
Piano Forums at UK Piano Page, feel free to read the posts on our piano forums. If you wish to reply to a post or submit a new post you must register first, it's free.
Please read the Piano Forum FAQ for more details. Also, read the piano FAQ for common questions on pianos Please don't ask us to place a value on your piano as an on site inspection is required. Contact you local piano tuner who will be more than happy to help.
There seem to be a few issues. One is that the CVP-20 doesn't emit note-on and note-off events, only note-on events which have a velocity of zero if they're meant to be note-off events. I guess this is workable but seems odd.
The next is that the channel number on each event switches randomly between channel 0 and whatever send channel I've selected on the CVP-20. So if I've selected channel 0, this isn't a problem, but selecting any other channel leads to lots of notes left with non-zero velocities because the 'note-on' event happened on one channel and the note-off event happened on another.
There are some other gremlins kicking around - even with channel 0 selected, playing the CVP-20 keyboard through a MIDI synth leads to some very loud notes I definitely didn't hit occasionally, but tis is a bit hard to diagnose with the above issues going on.
The problems only seem to be in the data send from the keyboard; playing MIDI files back through it works fine.
Does anyone know if these are known problems with this model? Or is this likely to be a hardware defect of some sort in such an old model?
I've tried this with two different USB MIDI interfaces to make sure it's a not a hardware problem at that end.
Thanks for any help,
Who is online
Users browsing this forum: No registered users and 5 guests