NEW HAMMERS, ETC. AS TO SOUND

General discussion about piano makes, problems with pianos, or just seeking advice.

Moderators: Feg, Gill the Piano, Melodytune

Post Reply
MA. CECILIA M. DE MESA
Regular Poster
Regular Poster
Posts: 42
Joined: 30 May 2008, 04:25

NEW HAMMERS, ETC. AS TO SOUND

Post by MA. CECILIA M. DE MESA »

dear piano techs/tuners/makers..... i have an old zeitter & winkelmann upright piano and it was overhauled about 3 weeks ago.. it was not yet delivered in my house because i want to see to it that the sound is good so i went to my piano maker yesterday to see the development. i was not satisfied with the sound it produces unlike when i purchased that piano 5 months ago.. maybe they replaced the hammers and the other parts that need to be replaced... but the strings were not replaced... my question is... what is the effect of the new hammers as to the sound of my piano? is there a big difference in sound? maybe the springs were replaced too because there is a slight weight in the piano keys' action.... i want the sound of my piano before but it really needs to be overhauled because many parts were "torn" and broken...(i should say)..... hope you can shed light to this matter... thank you very much. sorry if i can't elaborate well, just hope you understand what i am saying... thanks a lot.
David B
Persistent Poster
Persistent Poster
Posts: 151
Joined: 26 Jul 2006, 09:25
Location: Kent, England

Post by David B »

Morning Ma,

I must say, I am getting a little confused. You have said several times that you have a Kawai K20, and that your friend had this zeitter & winkelmann. How many pianos have you got now? :shock:
MA. CECILIA M. DE MESA
Regular Poster
Regular Poster
Posts: 42
Joined: 30 May 2008, 04:25

NEW HAMMERS, ETC. AS TO SOUND

Post by MA. CECILIA M. DE MESA »

the zeitter & winkelmann was pawned to me... that is why....
i need answers..... thanks...
David B
Persistent Poster
Persistent Poster
Posts: 151
Joined: 26 Jul 2006, 09:25
Location: Kent, England

Post by David B »

You run a pawn shop? :shock:
Gill the Piano
Moderator
Moderator
Posts: 4032
Joined: 25 Oct 2003, 19:39
Location: Thames Valley

Post by Gill the Piano »

The sound is produced by the hammer hitting the string, which is amplified by the soundboard (very roughly speaking). Change any of these, you change the sound. Before you had it restored the hammers were probably old and deeply lined; new hammers will be smooth, and the sound clearer. New strings will have no rust - same result.
If your restorer can tone the new hammers to bring them down a little, you might prefer that. Don't ask us; speak to your restorer - he's the man who knows!
MA. CECILIA M. DE MESA
Regular Poster
Regular Poster
Posts: 42
Joined: 30 May 2008, 04:25

NEW HAMMERS, ETC. AS TO SOUND

Post by MA. CECILIA M. DE MESA »

just talked to the piano maker last night... he told me that the strings were removed, "stretched" and brought back again because the sound board was repaired etc... so does the stretching of the strings really affect the sound? if it is so... then how long will i wait to restore the sound i wanted?
tuna
Regular Poster
Regular Poster
Posts: 88
Joined: 24 Jun 2005, 00:16

Post by tuna »

Stretched?! Are you sure about that one? It sounds like an unusual technique.

By the way, was that a pawn or porn shop? :twisted:
MA. CECILIA M. DE MESA
Regular Poster
Regular Poster
Posts: 42
Joined: 30 May 2008, 04:25

NEW HAMMERS, ETC. AS TO SOUND

Post by MA. CECILIA M. DE MESA »

that's what he told me... since the piano was overhauled and major repairs were done, the strings were removed and brought back again... but the strings were not replaced..... still the old strings were used... how much is the effect of that as to the piano sound?
Barrie Heaton
Site Admin
Site Admin
Posts: 3605
Joined: 30 May 2003, 20:42
Location: Lanc's
Contact:

Post by Barrie Heaton »

Depends on the age of the strings but you would not stretch old strings you may twist the bass string to improve them

Bad use of a string wheel on the steels can scratch them

Barrie,
Barrie Heaton
Web Master UK Piano Page
vernon
Moderator
Moderator
Posts: 914
Joined: 12 Mar 2008, 10:29
Location: N.E.Scotland
Contact:

Post by vernon »

didn't you get an estimate of the work that was to be done and any indication as to the likely result?
wilhorwood
Junior Poster
Junior Poster
Posts: 11
Joined: 25 Apr 2023, 19:13

Re: NEW HAMMERS, ETC. AS TO SOUND

Post by wilhorwood »

Do you still have this piano? I am currently researching Z&W pianos because I am descended from the family that owned the company and want to be able to tell my kids about it. Do you have any photos of your piano and serial number?
Post Reply