Yamaha A1 Restoration

General discussion about piano makes, problems with pianos, or just seeking advice.

Moderators: Feg, Gill the Piano, Melodytune

Post Reply
Junior Poster
Junior Poster
Posts: 18
Joined: 30 Dec 2018, 09:35

Yamaha A1 Restoration

Post by Phrasemaker »

We purchased this Yamaha A1 toward the end of last year as my daughter was in need of an acoustic piano having had a Yamaha CVP-409 for a number of years which has served very, very well. We've decided to keep it as it has some really handy features which are great for composition and there are times when having two pianos can useful. For instance, we have had a lot of work done on the A1 over the last couple of months and there have been times when it wasn't available to use due to ongoing work.

We don't have loads of spare cash to spend and buying the piano meant a few sacrifices. Having taken delivery of the piano, letting it settle and then having it thoroughly examined for flaws we decided it is likely to be a keeper.

Obviously a 1994 piano is likely to have been played a fair bit and felt, leather, wood and metal behave and age differently over time. The case is in excellent condition and after a light buffing with a very fine T cut equivalent is almost as new.

After a few months and looking ahead and hearing my daughter play other pianos, often Bluthner or Steinway or simply much newer pianos I couldn't help being a bit critical of how our A1 sounded. We pondered saving again and part exchanging for a newer piano of similar size.

I was advised that perhaps hammer voicing could be an option. I'm no piano technician, but I have been in engineering using a vast array of materials over many years, I did a lot of reading and asked many people who do work with pianos about voicing hammers of this age. I also enquired about part exchanging the piano. Once I established an average price in respect of the part ex value. I decided voicing costs a very risky gamble and maybe I would be better to look at spending the difference between what we paid for the piano and what we have been offered if we part ex it on a refurbishment including new hammers. That way I wouldn't lose a pile of cash, I probably wouldn't gain either if we exchanged it.

So, new, different hammers, profiled shanks, knuckles, flanges and so on. Every part inside of the piano cleaned, everything else checked lubricated, adjusted or replaced if worn using superior parts.

The outcome is beyond what we hoped for, the piano plays and sounds fantastic. Yes we could have gone and got a brand new entry level grand piano of similar size brand new for the same overall price. What we wouldn't have got is a well made Japan built piano very similar to the C series instruments in terms of overall quality and design. The tuning is very, very stable and the sound board as aged nicely while being perfectly in tact as is every other part of the piano.

I've attached some images taken after the work was completed, also a link to a video of my daughter playing it two weeks after the work was completed. Of course none of this would be possible if piano tuners/technicians had become extinct. I'm posting this because someone who reads it might be in a similar position to where we were,
and might be considering a similar route.


Thank you for reading.
A1 03.jpg
A1 02.jpg
A1 01.jpg
Persistent Poster
Persistent Poster
Posts: 344
Joined: 05 Feb 2012, 13:37

Re: Yamaha A1 Restoration

Post by chrisw »

Well done for transforming your piano into something that plays and sounds exactly as you want it to do. You are absolutely correct that we pianists are indebted to our local tuner technicians for keeping our instruments in tip top condition. Coincidently my piano was new in 1994 and I spent my career in engineering working with many diverse materials including steels, aggregates, ceramics and crystalline materials.
Junior Poster
Junior Poster
Posts: 19
Joined: 16 Feb 2017, 09:45

Re: Yamaha A1 Restoration

Post by Pianist685 »

Congratulations, you definitely made the right decision. As I said in an earlier post, Yamaha pianos can be very good, one of the best instruments I ever played was a Yamaha at Haus der Musik in Vienna.

From a more general point of view, IMHO it is less important what the manufacturer's name is, all that counts is how much work and effort have been put into the regulation of a specific instrument in order to make it react and sound according to the expectations of the pianist. I recently tested the grand pianos in a dealer's showroom "just for fun" but none of the Bluethners, Steinways and Foersters she was so proud of would convince me.
Post Reply