Mr. A.Baldry MABPT, Dip CTB

Mr. A.Baldry MABPT, Dip CTB
4.67 star(s) from 3 votes

Contact Information

  • Leighton Buzzard, Bedfordshire LU7 8PP
  • Phone: View Phone
  • Mobile: 07841 162704
  • Send Message vCard

Fully qualified piano tuner and technician with 21 years experience.

Chappells of Bond Street's showroom tuner for 10 years.

Three years at Marksons Pianos in London. This role included some concert tuning, for artists such as Stevie Wonder and Paul Weller, amongst other well known artists.

Professional piano tuning and minor repairs with friendly service.


Alan  provides the following services

Tuning in Homes, Schools, Theatres and Concert Venues
Minor repairs
Supply and fit new castors
Advice on purchasing a new piano



Other Information

Other Categories:

Piano Tuners

Related Listings:
S & J Wallace Piano Tuning
Mrs Jill Osborn
Mr Jonathan Rowe BMus Hons MMus


Featured Listings

No Listings

Did You Know Piano Facts

Towards the middle of the fourteenth century German wire smiths began drawing wire through steel plates, and this method continued until the beginning of the nineteenth century. Iron, gold, silver, brass, gut, horsehair and recently nylon have been used for strings on many different instruments. The earliest use of steel wire occurred in 1735 in Wales, but is not thought to have been used for the stringing of instruments. The Broadwood piano company stated that they were using steel wire in 1815 from Germany and Britain, but this has not been confirmed. According to the Oxford Companion, it was in 1819 that Brockedon began drawing steel wire through holes in diamonds and rubies. Before 1834 wire for instruments was made either from iron or brass, until Webster of Birmingham introduced steel wire. The firm seems to have been called Webster and Horsfall, but later the best wire is said to have come from Nuremberg and later still from Berlin. Wire has been plated in gold, silver, and platinum to stop rusting and plated wire can still be bought, but polished wire is best. In 1862 Broadwood claimed that a Broadwood grand would take a strain of about 17 tons, with the steel strings taking 150 pounds each. There had been many makers, but it was not until 1883 that the now-famous wire-making firm of Roslau began in West Germany. According to Wolfenden, by 1893 one firm claimed their wire had a breaking strain for gauge 13 of 325 pounds. The same maker gives some earlier dates for the breaking strain of gauge 13: 1867 - 226 pounds; 1873 - 232 pounds; 1876 - 265 pounds; and 1884 - 275 pounds. Wolfenden said:"These samples were, of course, specially drawn for competition and commercial wire of this gauge cannot even now be trusted to reach above 260 pounds."