UK Piano Page Piano Forum
Please read the Piano Forum FAQ for more details. Also, read the piano FAQ for common questions on pianos Please don't ask us to place a value on your piano as an on site inspection is required. Contact you local piano tuner who will be more than happy to help.
1) Do you know any source for board-level spare components for the Korg C-15?
2) Is it worth it? It seems a waste because the keyboard is pretty nice - full 88 - and probably the most expensive part of the piano.
3) Can the electronics be replaced with newer components so that the chassis and keyboard can be retained? E.g., new amplifier.
Considering the cost when new, I would have expected Korg to use high quality long-life electronic components. Apparently not. Good old wood and sounding board pianos have a far superior lifespan. If the Korg is trash, I'll probably return to accoustic. Thanks.
Dave Kelley, Seattle
If you have been doing your own work to the keyboard, is it possible that you used a lubricant or cleaner of some kind. WD-40 and others is an absolute no-no. Depending on the age of the keyboard it may not be worthwhile trying to fix the problems as digital equipment devalues so quickly after a certain age.
To my knowledge, digital pianos and the like are not modular enough to take one bit out such as the main soundboard in order to replace it with another. Keys and contacts are one thing, but so much can go wrong with screws and wires connected to soundboards, etc that you could make a huge mess of things if you haven't done it before. Again, I would confirm this with Korg as I reckon you're going to need specialist intervention here given the tedium of the task in hand. Again, this can often be expensive depending on who you get to do the work.
I have heard reviews and feeback about some of Korg's earlier stuff with keys and even knobs and buttons wearing out. I have personally never been a fan of Korg's instruments from the mid to late 90s although I think they have improved with the introduction of their sturdier progressive hammer actions. The statistical life span of a digital piano is somewhere around 15 years. I have a 20 year old digital piano (Clavinova CVP-8) in my classroom which used to be in a church and then in my home prior to its current residence at school. It is still going well and no problems so far.
Keyboards, including different models in the same range from the same manufacturer, tend to be designed individually with little compatibility between each other as far as bigger assemblies (circuit boards, fittings, etc)are concerned. When you look at products from different ranges or even different manufacturers, you are unlikely to see any interchangeability between parts from different products, unless you go down to component level, and even there, VLSIs (Very Large Scale Integrated circuits - which are very common these days) and other components are specific to a model or manufacturer.
The only exception to this are cheap, own-branded products produced for the bottom end of the market by anonymous mass producers in China. This applies both to reliablity of products & components and use of generic sub-assemblies.
Adrian Thomas Music Services
Who is online
Users browsing this forum: No registered users and 4 guests