UK Piano Page Piano Forum
Piano Forums at UK Piano Page, feel free to read the posts on our piano forums. If you wish to reply to a post or submit a new post you must register first, it's free.
Please read the Piano Forum FAQ for more details. Also, read the piano FAQ for common questions on pianos Please don't ask us to place a value on your piano as an on site inspection is required. Contact you local piano tuner who will be more than happy to help.
I have a Yamaha p60 which I have been happily using for 4 years. Recently I need more sounds than the keyboard provides so have set up a whole load of VST instruments on my PC laptop, and bought a USB - Midi cable online. It is a small plastic box with midi in/out cables from one side and a usb cable on the other. The brand is not one I have found elsewhere on the internet, but have seen several others which are identical with other names. I guess it's a generic cable.
When I plug it into the laptop, it is recognised and installed by Windows XP, and the driver says it works properly. There is a red light on the midi box which lights up. When you plug it into the keyboard however, the yellow light lights up and flashes, but the green light does not. I have tried changing over the in/out ports on the keyboard, and have tried changing the midi channel on the keyboard, but there is no recognition on the computer that it recognises that the keyboard is attached and neither cubase, nor any of the independent VSTi programmes make any noises when I press the keys.
I don't know whether I'm doing something stupid wrong, or whether there is something wrong with either the keyboard, the usb lead or the computer. I don't think it's the computer, because it doesn't work on my girlfirend's computer either!
Can anyone help?!
Make sure that the laptop does supply power via it's USB ports - try anotherUSB powered device ( I know it should, but I have come across some laptops where this didn't work)
The computer will see the interface but it will not recognise what's on the other end, i.e. that it's a P60. As long as it sees the interface, you should be OK.
Make sure that you have the MIDI IN & OUT ports on Cubase set to the USB port.
The P60 should respond to & transmit MIDI automatically (at least on channel 1) - try esnding a track with information on all 16 channels.
buell motorcycle parts
Who is online
Users browsing this forum: No registered users and 1 guest