What is the difference between Overdamping and Underdamping?

A collection of FAQ's and informative articles on pianos

Moderators: Gill the Piano, FAQ's

Locked
FAQ's
Junior Poster
Junior Poster
Posts: 16
Joined: 09 Jun 2004, 09:36

What is the difference between Overdamping and Underdamping?

Post by FAQ's »

Overdamping is a system whereby the piano damping mechanism (the bit that shuts the piano up) is situated above the hammer strike line. Underdamping is where the piano dampers are placed below the hammer strike line. Advantages and disadvantages. Overdamping. Imagine an elastic band three-foot long, you twang it and then put your finger near to the end of the elastic band, to stop it vibrating. This is overdamping.

Take the same elastic band and place your finger near the centre to stop it from vibrating this is underdamping, which of course is more efficient. Overdamping is controlled by gravity where as underdamping is controlled by adjustable springs so on the whole underdamping is far more efficient than overdamping. However, there is one disadvantage with underdamping. That is, if the dampers are incorrectly aligned to the nodes and antinodes of the vibrating string this will result in, the dampers when they come in contact with the string, emphasising certain harmonics on the piano, thus giving you a harmonic ring, this is more common on small uprights and small grand’s as the margin of tolerance decreases as the piano becomes smaller.

Robin Foster MABPT
UK Piano Page Copyright 1999 - 2004
Locked