UK Piano Page Piano Forum
Piano Forums at UK Piano Page, feel free to read the posts on our piano forums. If you wish to reply to a post or submit a new post you must register first, it's free.
Please read the Piano Forum FAQ for more details. Also, read the piano FAQ for common questions on pianos Please don't ask us to place a value on your piano as an on site inspection is required. Contact you local piano tuner who will be more than happy to help.
I got a few year old Yamaha U3 piano. Everything works fine until recently when the music stand is not tucked in the keyboard lid anymore. As a result, when the lid is closed, the stand keep drop off and touch the black keys.
There are 2 small latches holding the music stand to the lid. The right latch has a small metal thing sticking out that should latch on to a hole in the music stand but it is no longer the case. I dont know if that is magnetic broken or something.
Do you know how it can be fixed?
Thanks very much in advance,
- Colin Nicholson
- Executive Poster
- Posts: 1831
- Joined: 04 Jul 2010, 19:15
- Location: Morpeth, Northumberland
1. Order a rubber O ring to fit in hole / glue in with impact adhesive. (Measure tab first)
Here is an example: https://www.modelsport.co.uk/associated ... cts/396471
Rubber O rings are usually used for Radio Controlled vehicles / gearbox or diff shafts / suspension mountings.
2. Heat shrink (wrap). Used to cover and seal 2 pieces of soldered wire.... Maplins sell it. Warm it onto the tab with a hair dryer or lightly touch with soldering iron to shrink it.
The metal tab is located into the hole by friction only/ the tab being slightly larger than the hole for a push-fit.
The parts are not magnetic.
3. Carefully bend the tab off-centre (with protected pliers/ grips).
Never tried any of these methods, but this would be a possible route I would consider.
Just general wear and tear I think. If you use glue, leave overnight first before trying.
Hope that helps
Who is online
Users browsing this forum: No registered users and 11 guests