UK Piano Page Piano Forum
Piano Forums at UK Piano Page, feel free to read the posts on our piano forums. If you wish to reply to a post or submit a new post you must register first, it's free.
Please read the Piano Forum FAQ for more details. Also, read the piano FAQ for common questions on pianos Please don't ask us to place a value on your piano as an on site inspection is required. Contact you local piano tuner who will be more than happy to help.
To allow users to play a MIDI file on any keyboard (or sequencer), the Standard MIDI File was developed, i.e. any compatible instrument could read the file - before this, manufacturers tended to have their own (multiple) file formats. Then (late 80's) GM -General MIDI- was developed as an industry standard voice set (128 voices) to allow users to play Standard MIDI Files (SMF) on any compatible instrument. Also, in an SMF, MIDI channel 10 should be reserved for Drums.
After a while, 128 voices seemed to be a bit limited, so XG was developed. This consists of 128 x 128 banks of 128 voices each, with the first bank still consisting of the original GM voices. This is an industry standard, so any compatible product from any manufacturer (including computer sound cards and mobile phones) should play the correct voice if a Standard MIDI File contains a "Bank Select" message (control change 0, Most Significant Bit - control change 32, Least Significant Bit), followed by a Program Change message. At the moment and in most instruments, not all voice locations within the 128 x 128 banks contain voices, nor does any instrument (to the best of my knowledge) have a full set (over 2million) of voices. Most instruments tend to use "Bank Select 0" to select a voice set (GM, user voice, sound effects, drums etc.) and "Bank Select 32" to pick a bank within that set. The actual instrument (piano, flute, guitar etc.) is then selected with a program change message. Any instrument which is GM compatible, but not XG, will ignore the "Bank Select" messages and just pick the appropriate GM voice.
In the 80's MIDI was not as standard as it should have been. Roland for instance, used the "Note OFF" message when you released a key, everyone else used "Note On - velocity 0" (which is standard these days), so if you used a DX7 to control a Roland keyboard, notes used to just hang. Yamaha also used "Active Sensing" as standard, which confused some other instruments which, instead of ignoring the message if they didn't understand it (standard these days), tried to make sense of it and tied themselves up in a knot.
Adrian Thomas Music Services